Anycubic PLA Matte Filament 1kg - Nardo Grey

Smooth matte finish that hides layer lines | Clean support removal with no sanding required | Compatible with 0.2 mm nozzles and above | Pre-configured factory parameters for consistent results | 1 kg spool of FDM PLA filament

The Anycubic PLA Matte filament in Nardo Grey is designed for FDM 3D printing enthusiasts who want display-quality results without extensive post-processing. Its fine, uniform matte texture naturally minimises the appearance of layer lines, making it well suited to decorative parts, artistic sculptures, anime figurines, and fandom pieces. Supports peel away cleanly, leaving a smooth contact surface that needs no sanding. Pre-configured with factory-tuned printing parameters, it works at nozzle temperatures between 190 °C and 230 °C, a heated bed of 60–65 °C, and printing speeds from 50 to 250 mm/s — so you spend less time calibrating and more time creating. The 1 kg spool covers a broad range of projects, and the filament is compatible with any 1.75 mm FDM printer using a 0.2 mm or larger nozzle.

Features

• Matte texture minimises visible layer lines for cleaner, more realistic prints
• Supports remove cleanly and effortlessly — no sanding or post-processing needed
• Pre-configured factory parameters for consistent, high-quality results straight away
• Compatible with all 1.75 mm FDM printers using a 0.2 mm nozzle or above
• Intelligent identification chip supported for automatic parameter recognition on compatible Anycubic printers
• Reusable filament spool with threaded locking system to reduce entanglement and feeding errors
• Compliant with RoHS, REACH, and SDS certifications

Specifications

• Colour: Matte Nardo Grey (#898B8E)
• Dry Out Before Use: Recommended
• Drying Condition: 55-65℃, 6-8h
• ACE Compatibility: Compatible
• Nozzle Size: Recommended 0.2 mm or above
• Printing Temperature: 190-230 ℃
• Heated Bed Temperature: 60-65 ℃
• Recommended Printing Speed: 50-250 mm/s
• Cooling Time: 8 s
• Maximum Volume Speed (Flow Rate): 12 mm³/s
• Density: 1.25 g/cm³
• Melt Index: 8±3 g/10 min (190℃/2.16kg)
• Melting Point Temperature: 163 ℃
• Vicat Softening Temperature: 57 ℃
• Heat Deflection Temperature (0.45MPa): 54 ℃
• Young's Modulus: 2600±150 MPa
• Tensile Strength: 38±2 MPa
• Elongation at Break: 13±4%
• Bending Modulus: 3200±100 MPa
• Bending Strength: 67±2 MPa
• lzod lmpact Strength (X-Y): 19±1 kJ/m²
• Tensile Strength (Z): 12±2 MPa
• Filament Type: Aesthetic filaments
• Recommend to Print: Decorative parts, fandom, artworks, anime figurines
• Intelligent Identification: Supported
• Reusable Filament Spool: Supported
• Size: 1KG

What's in the Box

• Anycubic PLA Matte Filament 1kg - Nardo Grey x1